SoftBank Whiz Operational Manual page 73

6
Place the machine so that the machine's sensor and the Home Location Code are parallel, and scan
the Home Location Code
n When the machine has scanned the Home Location Code correctly, a green frame appears. Otherwise,
a red frame appears. Check that the Home Location Code is placed in the correct location (⇒see
"L ocations for Placing Home Location Codes "), or that the Home Location Code and machine are
distanced about 80 cm 2.6ft
7
Select for where to save cleaning route
The selected spot is assigned to the new cleaning route.
A screen appears for checking whether there are any escalators, steps or other moving platforms in
the cleaning area.
n Once the number of saved routes has reached the limit, either delete existing cleaning routes
(⇒see "Deleting Cleaning Routes"), or scan a different Home Location Code.
apart.
68