Locations For Placing Home Location Codes; Scanning Home Location Code - SoftBank Whiz Operational Manual

Locations for Placing Home Location Codes

n Place Home Location Codes on walls, columns, etc. near areas that are frequently cleaned.
n The back of Home Location Codes is sticky, allowing them to be placed directly on walls, etc. Replace with
new Home Location Codes if they have lost their stickiness. Depending on the wall material, the coating may
peel where Home Location Codes are placed. Consult with the building manager and place Home Location
Codes in appropriate locations. Do not place on walls with rough surfaces.
n Place Home Location Codes on walls, columns, etc. in a bright location and distanced approximately 60 cm
(2.0ft) from the floor and approximately 80 cm (2.6ft) from the machine.
n Do not place Home Location Codes where they may be hidden, such as walls behind furniture or shelves.
n Ensure that all Home Location Codes are placed neatly in a horizontal fashion, and not in a manner that is
askew; set the Home Location Code horizontally and a little below the camera, placed in front of the machine.
n Do not place Home Location Codes in a sleeve or cover, and do not copy on them or laminate them. The
machine may not be able to scan the Home Location Codes.
n Avoid locations exposed to sunlight or strong light, and set them where brightness is even.
n Leave Home Location Codes always set out. If unable to leave Home Location Codes always set out, you must
place them accurately in the same positions each time you clean. If the set locations of Home Location Codes
are even slightly shifted, cleaning will not be done correctly.

Scanning home location code

Home Location Codes are scanned with the camera on the front of the machine (⇒see "Names of Parts").
n Move the machine to where the distance between the camera and a Home Location Code is approximately
80 cm 2.6ft , and stop the machine so that the Home Location Code and machine are parallel. If the
machine is not positioned properly, it cannot scan the Home Location Code.
n Once the machine has scanned the Home Location Code, a screen for selecting cleaning routes appears on
the touch display.
54