SoftBank Whiz Operational Manual page 69

11
Use the steering handle to move the machine, and clean the entire cleaning route (teaching route)
n Changing between normal mode and max power mode ( see "Max Power Mode Button") is also learned in
a cleaning route.
n Teaching a cleaning route with few detours allows the machine to travel with fewer decreases in speed for
more efficient cleaning.
n The speed at which the machine travels as you are cleaning along the cleaning route (teaching route) has
no effect on automatic travel. Clean at your own pace, stopping to check the cleaning route, etc. as needed.
n Be sure to move the machine forward. Backward movement is not learned in a cleaning route.
n Do not lift either the machine or wheels up from the floor while teaching a cleaning route.
n Do not abruptly stop other than for an emergency. Suddenly turning the machine or changing directions
while teaching a cleaning route may affect teaching of the cleaning route. Make sure the machine travels in
as straight a direction as possible.
n To cancel cleaning route teaching, pause the machine, and on the touch display, tap "CANCEL
ROUTE"→"YES - CANCEL".
Press the Vacuum power button
Cleaning mode will turn off.
64