Notification Pager Functions & Usage - SoftBank Whiz Operational Manual

Notification Pager Functions & Usage
n When the machine detects danger or detects an obstacle, an alert will be displayed on the notification pager
(⇒see "Alert display and its notification timing") and it notifies the operator by emitting an alert and vibrating.
It emits an alert and vibrates for 15 seconds then stops for 5 seconds, which it repeats for 10 minutes. After
the error with the machine has been resolved, the notification pager sounds for 1 second and its display
indicates standby.
n To receive alert notifications, pair the machine and the notification pager (⇒see "Pairing the Notification
Pager"). Once the display on the notification pager indicates communication, place it in the pager
compartment to complete pairing.
During autonomous cleaning, always carry the notification pager on you. Alerts cannot be received
n
while the notification pager is in the pager compartment.
n The range in which the notification pager can communicate with the machine is a direct line up to 300 m
(2 floors above and below).
* Communication range depends on the environment. Walls made of, or containing large amounts of
metal may impact communication.
n After using the notification pager, place it in the notification pager charger (⇒see "Recharging the
Notification Pager").
n If the notification pager won't be used for a long period of time (approx. 2 months) turn the switch Off
(⇒see "Turning the Notification Pager On/Off").
90