SoftBank Whiz Operational Manual page 137

Terminology
Pager main button
Pager mute switch
RIN
R
Robot Operations
Center
ROC indicator
Rubber pads
Secondary battery
S
power button
Steering handle
Teach route
T
Teaching route
Touch display
Vacuum power button
V
Whiz Connect app
W
Whiz Connect Portal
Button for turning the notification pager (⇒see "Notification Pager") on/off.
Switches the alert on/off that sounds when the notification pager receives an
alert message (⇒see "Notification Pager").
The machine's serial number. The RIN is indicated on a sticker located on the
inside of the battery door on the machine.
The Robot Operations Center is Brain Corp.'s cloud-based robotics center. Via
LTE connection, it provides remote monitoring and managed usage of the
machine, and automatically sends reports on daily use and cleaning results,
software updates, and messages indicating the occurrence of any abnormalities
to the operator.
When the machine is connected to the Robot Operations Center (ROC), the
ROC indicator will display on the touch display (⇒see "Touch Display").
Prevent the machine from being scratched when laid on the floor.
This button is used to replace the battery while the machine is on during
autonomous cleaning. When using this machine or when not using it for a long
time (1 week or more), turn off the secondary battery power button and turn it on
only when replacing the battery (⇒see "Secondary Battery Power Button").
Handle for moving the machine while it is standing on its wheels, using for
manual cleaning, and when teaching a cleaning route. When carrying out
autonomous cleaning, stow the steering handle in the main unit beforehand as a
safety precaution (⇒see "Steering Handle").
Use Home Location Codes to teach cleaning routes in autonomous cleaning
mode. A cleaning route can be taught either automatically ( see "Teaching a
Cleaning Route Automatically") or manually ( see "Teaching a Cleaning Route
Manually").
Having the machine learn a cleaning route beforehand to use during
autonomous cleaning ( see "Teaching a Cleaning Route Manually" or
"Teaching a Cleaning Route Automatically").
Screen for checking the machine's battery level and operating time, connection
to the Robot Operations Center, error messages, etc. Cleaning routes are also
taught and selected by tapping the touch display (⇒see "Touch Display").
Button for starting/ending vacuuming (⇒see "Vacuum Power Button").
App for checking current robot operation and alerts.
Portal site allowing management of current robot operation and alerts as well as
downloading of operation reports.
132
Description