SoftBank Whiz Operational Manual page 135

Whiz Operational Manual
Glossary
Terminology
Accessory box
A
Autonomous clean
start/stop button
Autonomous cleaning
Battery
B
Battery charger
Battery Compartment
BrainOS
Brush
Bumper
Display (notification
D
pager)
Delay start
Dustbag
Dustbin
Dustbin access handle
Dustbin cover
Emergency stop button
E
Group Function
G
The box includes notification pager, notification pager charger, pin and micro-fiber
cloth. Upon arrival, accessory box will be stored inside the battery box.
Use to start autonomous cleaning mode or to pause/resume autonomous cleaning.
The autonomous clean start/stop button (⇒see "Autonomous Clean Start/Stop
Button") can only be used in autonomous cleaning mode.
The operator teaches a cleaning route on the machine beforehand ( see "Teaching
a Cleaning Route Manually" or "Teaching a Cleaning Route Automatically") so that
the machine can clean by itself without the operator cleaning with it manually. When
using autonomous cleaning, stow the steering handle in the main unit beforehand as
a safety precaution (⇒see "Autonomous Cleaning (Robot)").
Battery in the machine. Use the special charger for recharging the battery. (⇒see
"About Battery and Recharging")
Charger for recharging the machine's battery (⇒see "Recharging the Battery").
Box where the machine's battery is inserted.
Innovative artificial intelligence (AI) technology developed by Brain Corp. for allowing
a unit to clean on its own.
Rotating brush that collects dirt and dust into the hopper tray, and also aids efficient
vacuuming (⇒see "Brush").
Shock absorber for impact or vibration if the machine contacts obstacles, etc.
The screen is for checking the notification pager's battery level, Robot Operations
Center (ROC) connection status, alerts, etc (⇒see "Notification Pager Functions").
After setting the starting time of autonomous cleaning beforehand, autonomous
cleaning will start automatically at the set time.
Dustbag for collecting vacuumed dirt and dust (⇒see "Dustbag").
Box in which the dustbag (⇒see "Dustbag") is attached.
Knob on the dustbin cover for opening and closing the dustbin.
Cover on the dustbin. Before closing the dustbin cover, check that the dustbag
(⇒see "Dustbag") inside the dustbin is attached properly.
Button used in an emergency. Pressing the emergency stop button immediately
brakes the machine and all functioning stops (⇒see "Emergency Stop").
To resume autonomous cleaning after an emergency stop, turn the emergency stop
button to the right to release the emergency stop and press the autonomous clean
start/stop button (⇒see "Autonomous Clean Start/Stop Button").
It is a function that multiple robots can share cleaning routes (⇒see "Group Function
and Cleaning Routes"). Need to create a group in advance through the Whiz
Connect Portal, and assign robots to the group.
130
Description