Charging The Battery And Installing It Into The Machine - SoftBank Whiz Operational Manual

Charging the Battery and Installing it into the Machine

1
Charge the battery ( ⇒ see "Recharging the Battery")
2
Pull the bottom left of the battery door toward you to open
n Remove the accessory box from inside the battery compartment.
3
Insert a fully charged battery as far as it can go
When the battery is locked in, you will hear a "click" and see the lock pop into place.
n Hold the grips by both hands, and careful not to drop the battery.
Insert the battery in the battery compartment by its terminal end first.
n
4
Check that the battery is locked
5
Close the battery door
31