SoftBank Whiz Operational Manual page 79

5
Check for any escalators, steps or other moving platforms in the cleaning area and tap "NO"
Tap "YES" and a barrier warning screen appears. Check the warning message and tap "CONFIRM".
Tap "CANCEL" and a cautionary screen of autonomous cleaning appears.
6
Stow the steering handle
7
Remove the notification pager from the machine ( ⇒ see "Notification Pager")
8
Press the autonomous clean start/stop button ( ⇒ see "Autonomous Clean Start/Stop Button")
Autonomous cleaning begins.
n Remove the notification pager (⇒see "Notification Pager") from the machine and carry it with you.
n During autonomous cleaning, the LED light flashes orange twice in the direction the machine is turning.
(example: when the machine is going to turn right, the LED light on the right side will flash).
n During autonomous cleaning, the machine travels somewhat away from the edges of walls at a certain
distance so as not to scratch walls, etc. Use manual cleaning to clean the edges of walls (⇒see "Manual
Cleaning").
During autonomous cleaning, do not stand in front of the LIDAR sensor.
n
74