Handling The Battery Charger - SoftBank Whiz Operational Manual

Handling the Battery Charger

DANGER
Do not use the battery charger at or near a place with dust, salt, corrosive gas, or flammable
gas.
Using the battery charger at or near a place with dust, salt, corrosive gas or flammable gas could
cause fire, injury, electric shock, damage, malfunction, chemical explosion, or other damage to the
machine, battery charger, battery or notification pager or surrounding individuals or property.
Do not insert metal pins, or other foreign materials in the air vents in the battery charger.
Doing so may cause fire, injury, electric shock, damage, malfunction, overheating, leakage, chemical
explosion, or other damage to the machine, battery charger, battery or notification pager.
Use the battery charger in an environment with an ambient temperature of 0°C to 45°C,
and humidity of 20% to 85%. When not using the battery charger, store in an environment
with an ambient temperature of -10°C to 60°C, and humidity of 20% to 85%.
Failure to do so may result in fire, injury, electric shock, damage, malfunction, overheating, leakage,
chemical explosion, or other damage to the machine, battery charger, battery or notification pager.
WARNING
Only use power cables with labels for your country (country name) of residence. Do not use
other power cables.
Doing so may cause fire, injury, electric shock, damage, malfunction, overheating, leakage, chemical
explosion, or other damage to the machine, battery charger, battery or notification pager.
Do not connect to any battery other than the supplied battery.
Doing so may cause fire, injury, electric shock, damage, malfunction, overheating, leakage, chemical
explosion, or other damage to the machine, battery charger, battery or notification pager.
The battery charger sometimes becomes hot. Be careful during and immediately after
charging.
Failure to do so may result in burns or other injuries.
Make sure not to cover the battery charger with fabric, etc. Maintain conditions that allow
adequate
heat dissipation, and do not use or leave near a source of heat, or where exposed to water
or direct sunlight.
Failure to do so may cause fire, injury, electric shock, damage, malfunction, overheating, leakage,
chemical explosion, or other damage to the machine, battery charger, battery or notification pager.
Check that the supplied voltage is appropriate for the battery charger.
Do not use any power source or voltage other than that specified (AC 100 V to 240 V, 50 Hz to 60
Hz).Failure to use the proper power source or voltage may cause fire, injury, electric shock, damage,
malfunction, overheating, leakage, chemical explosion, or other damage to the machine, battery
charger, battery or notification pager.
Make sure that dirt or other foreign matter do not adhere to the battery charger.
Do not use in a dusty place. If the plug is dusty, unplug it from the outlet and wipe with a dry
cloth.
Failure to do so may cause fire, injury, electric shock, damage, malfunction, overheating, leakage,
chemical explosion, or other damage to the machine, battery charger, battery or notification pager.
Do not use the battery charger or power cable if damaged.
Failure to do so may cause fire, injury, electric shock, damage, malfunction, overheating, leakage,
chemical explosion, or other damage to the machine, battery charger, battery or notification pager.
The battery charger is designed specifically for the machine. Use only the supplied
designated
power cable. Do not use the power cable with any another product.
Failure to use the supplied designated power cable may cause fire, injury, electric shock, damage,
malfunction, overheating, leakage, chemical explosion, or other damage to the machine, battery
charger, battery or notification pager.
8