Recharging The Battery - SoftBank Whiz Operational Manual

Recharging the Battery

Before using the machine, set the main power switch on the machine off and remove the battery. Then place the
battery in the charger until fully charged.
When replacing the battery during autonomous cleaning, turn the Secondary Battery Power Button on (⇒see
"Secondary Battery Power Button"). After the battery is replaced, turn the Secondary Battery Power Button off.
n As a safety precaution, always use both hands when removing/installing the battery or
inserting/removing it from the charger. Doing so with only one hand may allow it to fall, which is very
dangerous.
1
Connect the power cable for the charger to the charger, and connect the power plug to an outlet
2
Press the main power switch (I/O) to set it off (O)
3
Open the battery door by pulling its bottom left toward you
98