4
Check the marks on the left and right ends of the new brush
The mark on the left
n
When the machine is laid down, with the front side facing up, you will see the sockets of the brush
compartment. These sockets correspond to the right and left sockets of the brush.
5
Insert the right end of the brush into the corresponding socket of the brush compartment
6
Push the brush in to the right, and attach the left end of the brush to the socket while aligning the
same marks
n
Spin the brush and check that the marks on the left and right side of the brush are installed correctly in the
socket.
The mark on the right
29