Hepa Filters - SoftBank Whiz Operational Manual

HEPA Filters

Check that dirt has not accumulated in the HEPA filters and that they are not damaged. If dirt has collected or
they are damaged, replace them with new filters following the steps below.
n Do not wash the HEPA filters with water.
n When disinfecting around the HEPA filters with alcohol, avoid the rubber parts.
1
Place your fingers in the holes of the filter cover and turn to the left to remove
2
Hold the HEPA filter by the tab in the middle and remove
3
Install the new HEPA filter, replace the filter cover, and turn to the right to close
Replace the other HEPA filter also as required.
n
107