Table of Contents
Advertisement
IQ plus 210 Installation Manual
3.2.5
Digital Input Menu
CONFIG
Parameter
Choices
OFF
DIGIN1
DIGIN2
ZERO
UNITS
PRINT
3.2.6
Default Menu
The DEFLT menu is used to reset indicator configuration to the default values. There are no parameters associated with the
DEFLT menu. From the DEFLT menu, press
the indicator to the default configuration values or press
above.
All load cell calibration settings are lost when the RESET function is performed.
NOTE:
CONFIG
3.2.7
Version Menu
The VERS menu is used to check the software version installed in the indicator. There are no parameters associated with the
VERS menu: when selected, the indicator displays the installed software version number.
CONFIG
18
Visit our website
FORMAT
CALIBR
SERIAL
XXXXXXX
Figure 3-10. Digital Input Menu
DIG IN Menu
Level 2 submenus
Specifies the function activated by digital inputs 1 and 2.
Table 3-6. Digital Input Menu Parameters
(
) to move down to the RESET parameter. Press
ENTER
ZERO
RIGHT
XXXXXXX
FORMAT
CALIBR
SERIAL
Figure 3-11. Default Menu
FORMAT
CALIBR
SERIAL
XXXXXXX
Figure 3-12. Version Menu
www.RiceLake.com
DIG IN
XXXXXXX
DEFLT
DIGIN1
OFF
ZERO
UNITS
PRINT
Description
(
) to cancel the indicator reset and return to the menu level
UNITS
XXXXXXX
DIG IN
DEFLT
RESET
DIG IN
XXXXXXX
DEFLT
VERS
DIGIN2
OFF
ZERO
UNITS
PRINT
again to reset
ENTER
VERS
VERS
Software
version
Advertisement
Table of Contents
