Rice Lake IQ plus 210 Installation Manual page 18

IQ plus 210 Installation Manual
Most of the configuration menus have three or four levels.
configuration menus. Note the following:
• On the first (main) menu level, press
around to the
CONFIG
• On the middle (parameter) menu levels, press
last parameter is displayed, pressing
move down to the values prompts for that parameter.
• On the bottom (parameter value) menu level, press
from the last value wraps around to first value. Press
To edit numerical values, use the
the flashing digit (see Figure 3-5 on page
parameter prompt.
Menu Navigation
General Structure
RIGHT RIGHT
CONFIG XXXXXXX FORMAT
ENTER
Pressing
RIGHT
Parameter 1
ENTER
RIGHT
Value 1
Press at any parameter value to select the value and return to the parameter prompt
ENTER
12
Visit our website
to scroll through the menus. Pressing
RIGHT
menu. Press from any of the main menus to move down to the first parameter for that menu.
ENTER
RIGHT
returns to the level above. Press
RIGHT
button to select the digit; use the
RIGHT
13). Once all digits have been edited, press
RIGHT
RIGHT
CALIBR SERIAL
at the last parameter prompt returns to the menu prompt
RIGHT
RIGHT
Parameter 2 Parameter 3
RIGHT RIGHT
Value 2 Value 3
Figure 3-3. General Menu Structure
www.RiceLake.com
Figure 3-3 shows the general structure of the IQ plus 210
to scroll through the parameter prompts for the menu. When the
to scroll through the values for the parameter. Pressing
RIGHT
to select the value and return to the parameter prompt.
ENTER
button to increment or decrement the value of
ENTER
RIGHT RIGHT
XXXXXXX
DIG IN DEFLT
RIGHT
Parameter 4
RIGHT
Value 4
RIGHT
from the menu wraps
RIGHT VERS
from any parameter prompt to
ENTER
to save the value and return to the
ENTER
ZERO
(ENTER) (RIGHT)
VERS RIGHT
RIGHT
UNITS