Setup - Digital I/O Menu; Setup - Analog Output Menu - Rice Lake Synergy 680HE Technical Manual

680HE Synergy Indicator
4.4.9 Setup – Digital I/O Menu
Parameter
Digital I/O Bit 1-4 – Specifies the mode and function of the digital I/O pins; Settings: OFF (default), PRINT, ZERO,
bit 1-4
TARE, UNITS, PRIM, SEC, CLEAR, DSPACC, DSPTAR, CLRACC, CLRTAR, NT/GRS, GROSS, NET, CLRCN,
KBDLOC, BATRUN, BATSTR, BATPAS, BATRST, BATSTP, OUTPUT
4.4.10 Setup – Analog Output Menu
Instructions to install and setup the analog output option card are provided with the option card kit (PN 195084).
Setup
ALGOUT
SOURCE
Parameter
Source – Specifies the scale tracked by the analog output; Settings: GROSS (default), NET
source
Output – Specifies the voltage or current tracked by the analog output; Settings: 0-10V (default), 0-20MA, 4-20MA
output
Error Action – Specifies how the analog output responds to system error conditions; Settings:
erract
FULLSC (default) – Set to full scale (10 V or 20 mA)
HOLD – Holds current value
ZEROSC – Sets to zero value (0 V, 0 mA or 4 mA)
Minimum Weight – Specifies the minimum weight value tracked by the analog output; Enter value: ±99999.0, 0.0 (default)
min
Maximum Weight – Specifies the maximum weight value tracked by the analog output; Enter value: ±99999.0, 10000.0 (default)
max
Tweak Zero – Adjusts the offset of the analog output zero value; Enter value: 0–65535, 0 (default)
twzero
Tweak Span – Adjusts the offset of the analog output span value; Enter value: 0–65535, 59515 (default)
twspan
38 Visit our website
Setup
DIGIO
slot 0
bit 1 bit 2
Figure 4-21. Setup – Digital I/O Menu
Table 4-18. Setup – Digital I/O Menu Parameters
OUTPUT ERRACT
Figure 4-22. Setup – Analog Output Menu
Table 4-19. Setup – Analog Output Menu Parameters
www.RiceLake.com
bit 3 bit 4
Description
MIN MAX twzero
Description
twspan