Front Panel; Led Annunciators; Indicator Operations - Rice Lake IQ plus 210 Installation Manual

IQ plus 210 Installation Manual
1.3

Front Panel

Figure 1-1 shows the IQ plus 210 LED annunciators, buttons, and normal mode key functions.
Neg
Zero
Motion
1.4

LED Annunciators

The IQ plus 210 display uses a set of seven LED annunciators to provide additional information about the value being
displayed:
• annunciator lights to show that the displayed value is negative.
Neg
• : Weight is within 0.25 graduations of zero. This annunciator lights when the scale is zeroed.
Zero
• : Scale in motion outside the specified motion band. Zeroing and print operations can only be done when the
Motion
motion LED is off.
• and annunciators indicate the units associated with the displayed value: lb = pounds,
, , ,
lb kg oz g
kg = kilograms, oz = ounces, g = grams.
ounces.
1.5

Indicator Operations

Basic IQ plus 210 operations are summarized below.
Zero Scale
1. Remove material from the scale and wait for the
2. Press the button. The
ZERO
Change Display Units
Press the button to change the displayed units between primary and alternate units. The LED annunciators on the right
UNITS
side of the display show the current displayed units. If more than one alternate unit is configured, the display cycles through the
alternate units before returning to primary units; if no alternate units are configured, the display does not change when the
button is pressed.
2
Visit our website
D I G I T A L
ZERO
ZERO/ENTER
Move down in menu or
enter parameter value and
return to menu level above
Figure 1-1. IQ plus 210 Front Panel
and
lb oz
annunciator lights to indicate the scale is zeroed.
zero
www.RiceLake.com
W E I G H T I N D I C A T O R
UNITS
UNITS/RIGHT
Move right in menu /
next parameter value
annunciators are both lit when the displayed weight is in pounds and
LED to go out.
Motion
kg
g
lb
oz