Digital Input Menu - Rice Lake IQ PLUS 710 Installation Manual

SETPTS Menu
Parameter Choices
ACCESS ON
HIDE
OFF
NAME NONE, 1–60
DIGOUT NONE, 1–8
3.2.8

Digital Input Menu

FORMAT
CONFIG CALIBR
DIGIN1 DIGIN2
BATSTRT
BATRUN
BATPAUS
BATSTRT
BATPAUS
CLRCN
GROSS CLRCN
NET
GROSS
PRIM
SEC PRIM
SEC
TIME
DATE
TIME
CLRTAR DATE
CLRTAR
CLRACC
OFF CLRACC
ZERO
NT/GRS ZERO
•
•
•
see DIGIN 3–8 for complete list of values
All setpoint types: Specifies whether the SETPOINT key can be used to change the
setpoint value in normal mode, including macro simulations of pressing the
SETPOINT key.
ON: Value can be displayed and changed
HIDE: Value cannot be displayed or changed
OFF: Value can be displayed but not changed
Setpoints with ACCESS=ON can be turned on or off when a batch is not running:
• To turn the setpoint off, display the setpoint, then press CLEAR
• To turn the setpoint on, display the setpoint, then press ENTER
All setpoint types: Specify the number of an assigned prompt. Up to 60 prompt
names can be specified on the PROMPTS submenu of the PROGRM menu.
All setpoint types: Specifies a digital output associated with the setpoint. For
continuous setpoints, the digital output becomes active (low) when the condition is
met; for batch setpoints, the digital output is active until the setpoint condition is met.
Table 3-7. Setpoint Menu Parameters (Continued)
SERIAL PROGRM
NET
OFF
•
•
•
Figure 3-15. Digital Input Menu
Description
PFORMT SETPTS DIG IN
XXXXXXX XXXXXXX
DIGIN3 DIGIN4
KF1
OFF
ZERO KF2
NT/GRS
KF3
TARE KF4
KEY1
UNITS
PRINT KEY2
ACCUM
KEY3
SETPNT
KEY4
KEY5
TIMDATE
ESC KEY6
ALPHAMD KEY7
CLEAR KEY8
KEY9
DSPTAR
KEYDP
IDKEY
KEY0
ALGOUT VERS
XXXXXXX
DIGIN8
• • •
Same as DIGIN3
ENTER
KBDLOC
HOLD
BATRUN
BATSTRT
BATPAUS
CLRCN
GROSS
NET
PRIM
SEC
TIME
DATE
CLRTAR
CLRACC
Configuration 33