Digital Input Menu - Rice Lake 480Plus-2A Technical Manual

3.2.6 Digital Input Menu

CONFIG FORMAT
Parameter Choices
DIGIN1
DIGIN2
OFF
DIGIN3
ZERO
DIGIN4
TARE
NT-GRS
UNITS
DSPTAR
PRINT
CLRCN
KBDLOC
HOLD
CLRTAR
ACCUM
CLRACC
BATSTR
BATSTP
BATRES
BATPUS
BATRUN
NET
GROSS
PRI
SEC
CALIBR PROGRM DIG IN
DIGIN1-4
OFF
ZERO
TARE
NT-GRS
UNITS
DPSTAR
PRINT
CLRCN
Figure 3-14. Digital Input Menu
Specifies the function activated by digital inputs 1, 2, 3 and 4.
Sets the Digital Input to perform no function.
Same function as the front panel key.
Same function as the front panel key.
Net-Gross – same function as the front panel key.
Same function as the front panel key.
Displays the current tare value.
Same function as the front panel key.
Resets the consecutive number to the value specified on the CONSTU parameter (PROGRM
menu).
Disables the keypad while the digital input is held active.
Holds the current display. Releasing this input returns to normal display update mode.
Clears the tare.
Displays the accumulator.
Clears the accumulator.
Starts a batch process.
Stops a batch; any restart starts the batch at the beginning.
Resets the batch process so the pointers are aimed at first batching setpoint.
Pauses a batch, but allows it to restart at the point where it was paused.
A switch that allows a batch to be started. It must be active to allow any batch to run.
If not active, and a BATSTRT input is activated, the batch will abort or reset.
Puts the scale in net mode.
Puts the scale in gross mode.
Puts the scale in primary units.
Puts the scale in secondary units.
Table 3-15. Digital Input Menu Parameters
ALGOUT PASWRD USBMEM
KBDLOC
HOLD
CLRTAR
ACCUM
CLRACC
BATSTR
BATSTP
BATRES
Description
Configuration Using the Front Panel (Legal for Trade)
TEST MENU
BATPUS
BATRUN
NET
GROSS
PRI
SEC
41