Digital Input Menu - Rice Lake IQ plus 710 Installation Manual

3.2.8

Digital Input Menu

FORMAT
CONFIG CALIBR
DIGIN1
OFF
DSPTAR
ZERO IDKEY
NT/GRS KF1
TARE KF2
UNITS KF3
PRINT KF4
ACCUM KEY1
SETPNT KEY2
TIMDATE KEY3
ESC KEY4
KEY5
ALPHAMD
CLEAR KEY6
DIG IN Menu
Parameter Choices
Level 2 submenus
DIGIN1 OFF
DIGIN2 ZERO
DIGIN3 NT/GRS
DIGIN4 TARE
DIGIN5 UNITS
DIGIN6 PRINT
DIGIN7 ACCUM
DIGIN8 SETPNT
TIMDATE
ESC
ALPHAMD
CLEAR
DSPTAR
IDKEY
KF1—KF4
KEY0—KEY9
KEYDP
ENTER
BATRUN
BATSTRT
BATPAUS
KBDLOC
HOLD
CLRCN
SERIAL PROGRM PFORMT
XXXXXXX
KEY7
KEY8
KEY9
KEYDP
KEY0
ENTER
KBDLOC
HOLD
BATRUN
BATSTRT
BATPAUS
CLRCN
Figure 3-14. Digital Input Menu
Specifies the function activated by digital inputs 1–8.
• ZERO, NT/GRS (net/gross mode toggle), TARE, UNITS, and PRINT provide the same
functions as the five major front panel keys.
• ACCUM, SETPNT, TIMDATE, ESC, ALPHAMD, CLEAR, DSPTAR, and IDKEY provide the
same functions as the front panel keys.
• KF1—KF4 are equivalent to pressing the macro keys, F1—F4.
• KEY0—KEY9 and KEYDP (decimal point) are simulate pressing keys on the numeric
keypad.
• ENTER simulates pressing the front panel ENTER key.
• BATRUN allows a batch routine to be started and run. With BATRUN on (low), the BATSTRT
input starts the batch; if BATRUN is off (high), BATSTRT cancels the batch.
• BATSTRT starts or ends a batch routine, depending on the state of the BATRUN input.
• BATPAUS pauses a batch routine.
• KBDLOC locks the keyboard (indicator front panel).
• HOLD holds the current display. Releasing this input clears the running average filter.
• CLRCN resets the consecutive number to the value specified on the CONSTUP parameter
(PROGRM menu).
Table 3-8. Digital Input Menu Parameters
SETPNTS DIG IN
XXXXXXX
DIGIN2 DIGIN3
Same as DIGIN1
Description
ALGOUT VERS
XXXXXXX
DIGIN8
• • •
Configuration 31