Connection To Side-Mounted Terminals; Figure 5-3 Side-Mount Battery Terminals - Intermec 6600 User Manual

Connection to Side-mounted Terminals

1. Remove both battery terminal screws from the vehicle battery.
2. Screw a 3/8" nut (
furnished in kit.
3. Slip a 3/8" washer
4. Slide the positive (red wire with fuse link
battery cable onto the positive (+) battery terminal bolt.
5. Slip a second 3/8" washer
6. Slide the vehicle positive battery cable
7. Thread the bolt assembly (steps 1–6, above) into the positive battery
terminal. Tighten the bolt securely.
8. Tighten the nut
cables firmly in place.
Repeat steps #2 thru #8 for the negative wire (black or brown) from the battery
cable, hooking up the negative cables to the negative (–) battery terminal.
1
SECTION 5
) as far as it will go onto a 3/8" X 1-1/2" bolt
2
onto the bolt.
(6)
onto the bolt.
(6)
installed in step #2 to secure washers
(2)
2
6
1. Bolt
2. Nut
3. Vehicle battery
4. Vehicle battery cable
5. Fuse link
6. Washers
Figure 5-3
Side-Mount Battery Terminals
Vehicle Installation
"
) terminal ring from the
(5)
onto the bolt.
(4)
and
(6)
3
4
5
Model 6600 User's Guide 5-7
(1)