Reset Switch; Figure 3-13 Reset Switch - Intermec 6600 User Manual

Reset Switch

Virtually all computers occasionally fail to respond to user input, which is
why many offer a convenient "reset" switch. Lockups occur when too many
operations are going on at once, or when there is a conflict between hard-
ware and software timing or instructions. The reset switch in is located be-
hind the PC card compartment door. It is recessed behind the notch in the
compartment.
If your computer locks up, remove the PC Card compartment door and use a
ballpoint pen or paper clip to actuate the reset switch. Press gently on the
switch and within a few seconds the computer will reset. Be sure to rein-
stall the PC Card compartment door.
1. Notch
2. Reset switch
Reset Switch
1
inside the PC Card compartment
(
Figure 3-13
SECTION 3 Operation
"
2
)
Model 6600 User's Guide 3-17