Table of Contents
Advertisement
SECTION 5
Vehicle Installation
"
Connection to Top-mounted Terminals
Repeat steps #3 thru #6 for the negative wire (black or brown) from the Norand
battery cable, connecting the wire to the negative (–) battery computer.
5-8 Model 6600 User's Guide
1.
Remove the bolts from the vehicle battery terminals.
2.
Replace the bolts removed in step #1 with 3/8"
nuts
furnished in the installation kit. Tighten nuts securely.
(1)
3.
Slip a 3/8" washer
4.
Slide the positive (fuse link with red wire
battery cable onto the positive (+) battery bolt
5.
Slip a second 3/8" washer
6.
Thread a second 3/8" nut
1
6
1. 3/8" nut
2. Vehicle battery
3. Vehicle battery cable
4. Fuse link
5. 3/8" X 1-1/2" bolt
6. 3/8" washers
Top-Mount Battery Terminals
onto the extended end of each bolt.
(6)
onto that bolt
(6)
onto that bolt
(1)
5
4
Figure 5-4
X
1-1/2" bolts
(5)
) terminal ring from the
(4)
.
(5)
.
(5)
. Tighten the nut.
(5)
2
3
and
Advertisement
Table of Contents
