Adjustable Handstrap; Figure 2-5 Adjustable Handstrap - Intermec 6600 User Manual

SECTION 2 Options and Accessories
"
2-8 Model 6600 User's Guide

Adjustable Handstrap

Although the adjustable handstrap is standard on the Model 6600 Computer,
it is described in this section because it attaches to the unit with a special
snap just as the tethered pen accessory shown above.
Relocating the Handstrap
The adjustable handstrap is fastened along one side of the computer with a
snap on one end and a metal reinforcement and screw on the other end of
the strap. You can unsnap the handstrap and lengthen it to reach other male
snaps on the computer. You can also move the strap over to the other side
of the computer by unsnapping one end and removing the retaining screw
and the reinforcement from the other end of the strap. Relocate the strap to
the other side of the computer and refasten it.
Keyed Snap
(how to snap, and unsnap
When fastening these snaps, hook the edge opposite the dot first before
pressing the snap firmly into place. When removing the snap, pull on the
dot side of the snap first to release it.
Reads
"Pull the dot"
)
1
2
1. Dot
2. Snap
3. Screw
Figure 2-5
Adjustable Handstrap
3