Figure 5-8 Attach Base To Dock - Intermec 6600 User Manual

SECTION 5 Vehicle Installation
"
4
Install Mounting Assembly
Use the bottom of the mounting bracket and pedestal assembly as a template
to mark the hole locations where you are installing the vehicle dock. Be
sure to allow clearance for the dock with a computer inserted in it, and for
computer insertion and removal.
Drill appropriate sized holes in the vehicle sheet metal and secure the
mounting bracket and post assembly with nuts, bolts, and lockwashers. This
hardware is not furnished in the installation kit and must be purchased lo-
cally.
5-12 Model 6600 User's Guide
1
1. Nutplate(s)
2. Dock (bottom view)
3. Mounting base
4. Screw(s)
Figure 5-8
Attach Base to Dock
1
2
3