3
4.
Remove the quick-release paper from the adhesive pad on pen holder
clip
and press the clip in place, as shown above.
(3)
5.
Fasten the pen holder clip
6.
Remove the quick-release paper from the adhesive pad on pen holder
clip
.
(1)
7.
Place the free end of the pen in pen holder clip
8.
Pivot the pen downward to correctly position and fasten pen holder
clip
in place on the computer. See Figure 2-11.
(1)
SECTION 2
1. Pen holder clip (not yet installed)
2. Pen
3. Pen holder clip (installed)
Figure 2-10
Pen Holder Clips
to one end of the pen (
(1)
Options and Accessories
"
1
2
.
2)
.
(3)
Model 6600 User's Guide 2-13