Table of Contents
Advertisement
"
"
"
"
"
"
General Information
B
CAUTION:
B
CAUTION:
"
"
"
"
"
"
The Model 6600 Hand-Held Computer is shipped with a basic input-output
system ("BIOS" firmware), DOS, and Windows installed at the factory.
This section includes instructions for installing an additional, optional inter-
nal PCMCIA (PC Card) device and for changing or upgrading DRAM and
FLASH RAM. In any case, you must do the following before using the
computer for the first time:
Fully charge the main battery before using the
from an external power source.
Install any optional PCMCIA devices.
"
Install the main battery (unit will "beep" on startup).
"
Reinstall the battery compartment door.
"
Connect computer to a charging source
"
(or, make sure the battery was previously charged).
Connect any peripheral devices (e.g., printer) that will be used right
"
away.
To prevent scratches or damage to the display, do NOT use a ballpoint pen or a
sharp object to make entries directly on the display. Use ONLY the stylus
provided to make display-direct entries.
"
"
"
"
"
"
SECTION 3
"
Section 3
Operation
"
"
"
"
"
"
B
CAUTION:
computer away
Model 6600 User's Guide 3-1
Operation
"
"
"
"
Advertisement
Table of Contents
