SECTION 3
Operation
"
3-8 Model 6600 User's Guide
3.
Use four small screws to secure the PC Card drive.
Be sure to install the adjustable card retainer as shown.
4.
Reinstall the access panel (six screws).
5.
Remove the grounding clip attached to the shroud around the stan-
dard PC Card drive.
6.
Replace the door on the PC Card compartment.
7.
Reinstall the main battery.
8.
Replace the battery compartment door and return the unit to normal
service.
1. Screws
2. Adjustable card retainer
3. PC drive with PC Card or device installed
4. Connector (use gentle, even pressure)
Figure 3-6
Install PC Card Drive
1
2
3
4