Using Serial And Usb Communications; Checking The Status Of Your Wireless Connection - Intermec CN4 User Manual

Using Serial and USB Communications

Checking the Status of Your Wireless Connection

CN4 Series Mobile Computer User's Manual
4 Make sure that your CN4 is communicating with the network and
that the network can see your CN4.
You can use these CN4 accessories to transmit data to and receive data
from another device through serial or USB communications:
• AD10 single dock
• AV6 vehicle dock (AV9 for CN4e)
• AD11 multidock
• AA18 USB adapter
• AA17 RS-232/DEX adapter
For more information about these accessories and how to order them,
see "Accessories" on page
After you configure your wireless settings, you can use iConnect to
check the status of your connection. You can also use iConnect to
configure the network settings and test the connection of your CN4
against the network.
To check the status of your wireless connection
1 Tap the iConnect icon (
screen.
2 From the iConnect menu, select Status > Wireless. The Wireless
Status screen appears and checks the connection.
To configure the network settings
• From the iConnect menu, tap Tools > Wireless Settings.
To test the connection of your CN4 against your network
• From the iConnect menu, select Tools > Ping Test.
Chapter 2 — Connecting and Configuring the CN4
92..
) in the lower right corner of the Today
47