Table of Contents
Advertisement
SECTION 3
Operation
"
"
NOTE:
"
NOTE:
B
CAUTION:
B
CAUTION:
3-16 Model 6600 User's Guide
When the computer does start up, a DOS screen prompts you to choose the
mode of operation. If no choice is made after a programmed waiting period,
the computer defaults to Windows.
The battery compartment door must be in place or the unit will not operate.
The following instructions are based on the main battery pack being adequately
charged. If it is not, the computer must be connected to a charging source.
Start Up Procedures
Follow the steps below to perform a cold start:
1.
Remove both compartment doors.
2.
Insert any optional PC Card devices you will be using.
3.
Install the main battery pack, contact-end first.
4.
The computer will "beep" once to indicate a normal start up.
(the computer beeps twice to acknowledge a Master-mode start up).
5.
Reinstall the battery compartment door and lock it.
6.
Ensure that the computer responds to any installed PC Card options,
then reinstall the PC card compartment door and lock it.
Never use a ballpoint pen to make entries on the display.
Never use a sharp object to make entries on the display.
7.
Make entries using the special stylus, a scanner, or an
optional keyboard.
Advertisement
Table of Contents
