Final Connections; Vehicle Dock Alone; Vehicle Dock And Printer; Figure 5-10, Dock Connectors - Intermec 6600 User Manual

Intermec 6600: user guide

Hide thumbs Also See for 6600:

Table of Contents

SECTION 5

Vehicle Installation

Final Connections

5-14 Model 6600 User's Guide

If you are installing the vehicle dock by itself, you must connect one end of

the dc power cable (P/N: 206-951-001) to the vehicle dock: the other end

plugs into the previously installed battery cable.

If you are installing a printer in the vehicle, you must install a "Y" cable to

supply power to both the vehicle dock and to the printer. Plug one end of

this cable into the printer, the other into the vehicle dock. The rectangular

connector plugs into the battery cable.

You must also connect a Remote Computer Cable between the vehicle dock

and the printer: this cable allows the computer to communicate with the

printer.

1. External RS-232/485 communication (COM1)

2. IR communication port (COM2)

3. PS/2 keyboard

4. Ethernet connector (RJ-45)

5. Power (12 V dc)

Figure 5-10

Dock Connectors

Table of Contents