Power Supply Pins - Renesas R-IN32M4-CL3 User Manual

R-IN32M4-CL3 User's Manual: Board design edition
2.2

Power Supply Pins

This is a list of power supply pins of R-IN32M4-CL3. When designing with these pins, refer to the connection example
as follows.
Pin Name
PLL_VDD PLL power supply (1.15 V)
PLL_GND PLL_GND
VDD33 R-IN32M4 I/O power supply (3.3 V)
VDD11 R-IN32M4 internal power supply (1.15 V)
GND Ground potential for power supply (GND)
VDD25A GbE-PHY analog power supply (2.5 V)
VDD11A GbE-PHY analog power supply (1.15 V)
VDDREG_33 2.5-V built-in regulator power supply (3.3 V)
AVDDREG_33 2.5-V built-in regulator power supply (3.3 V)
AGND Ground potential for 2.5-V built-in regulator
power supply (GND)
R18UZ0074EJ0100
Dec 24, 2019
Function Reference for Connection Example
See Section 4, PLL Power Supply Pins.
See Section 4, PLL Power Supply Pins.
Supply power from the power unit such as a
regulator or DC-DC converter.
Supply power from the power unit such as a
regulator or DC-DC converter.
Connect GND of the system (board).
See Section 6.1, Power Supply Peripheral Circuit.
See Section 6.1, Power Supply Peripheral Circuit.
See Section 7, 2.5-V built-in Regulator Peripheral
Circuit Configuration.
See Section 7, 2.5-V built-in Regulator Peripheral
Circuit Configuration.
See Section 7, 2.5-V built-in Regulator Peripheral
Circuit Configuration.
2. Power/Reset Pins
Page 5 of 61