Table of Contents
Advertisement
R-IN32M4-CL3 User's Manual: Board design edition
Notes 1. In this mode, drive the HWRZSEL pin low.
2. Connecting the HERROUTZ signal is not indispensable.
Connect it to an interrupt or general-purpose port input of the MCU to be connected, if required.
3. Connected the address signal for a 128-Kbyte boundary from the destination to the HA17 pin of the
R-IN32M4-CL3.
4. Accessed is by byte-wise addressing.
R18UZ0074EJ0100
Dec 24, 2019
9. External MCU/Memory Interface Pins
Page 37 of 61
Advertisement
Table of Contents
