I Priority Watch Operation - Icom IC-91A Instruction Manual

I Priority watch operation

Although [DIAL] and [5/SKIP](ï) are used for description
in this section, [2/SCAN](∫ ∫ )/[8/TS](√ √ ) and [6/M.N](≈ ≈ ) are
available instead of [DIAL] and [5/SKIP](ï).
D D Memory/call channel and memory scan watch
q Select VFO mode; then, set an operating frequency.
w Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For call channel watch:
Select the desired call channel.
For memory scan watch:
Select memory mode, or the desired bank group; then,
push and hold [2/SCAN] for 1 sec. to start memory/bank
scan.
e Enter "PRIO WATCH" in scan set mode. (p. 00)
➪
MENU screen SCAN
(Push [MENU/LOCK]) (Rotate [DIAL]
r Rotate [DIAL]
†
to select "ON."
• Select "BELL" if the priority beep function is necessary.
t Push [VFO/MHz] to exit scan set mode and start the
watch.
• "PRIO" indicator appears.
• The transceiver checks the memory/bank channel(s) or call
channel every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 00)
y Push [VFO/MHz] to cancel the watch.
➪
PRIO WATCH
† †
, then push [5/SKIP](ï) .)
¥ During priority watch
FM FM PRIO PRIO
433 260
A
P SKIP SKIP
Monitors VFO frequency
for 5 sec.
¥ During priority watch with priority beep
FM FM PRIO PRIO
433 260
A
P SKIP SKIP
Emits beep and blinks S indicator when a signal is re-
ceived on a memory or call channel.
[DIAL] ↔ [2/SCAN](∫ ∫ )/[8/TS](√ √ )
†
10
PRIORITY WATCH
FM FM PRIO PRIO
145 180
A
µ 035 035
Pauses on a memory or
call channel when a sig-
nal is received.
FM FM PRIO PRIO
145 180
A
µ 035 035
[5/SKIP](ï) ↔ [6/M.N](≈ ≈ )
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
83