Table of Contents
Advertisement
Danger!
The Clutch Release Lock must be engaged in the locked position when the CPM Device is stored and when it is
in position for patient use.
Attention!
Before raising the CPM Device upright for storage, place it into full flexion to avoid foot plate interference with
mounting bar or bed frame.
Attention!
When applying the CPM to patient, make sure that the CPM is fully supported on the bed: the CPM should
NOT be supported by Lift Mechanism while applied to patient.
Fig. 7
To raise the CPM Device from the bed between treatments, make sure Clutch Release Lock is correctly engaged
(Figs. 7, 8, 9), and simply lift the CPM Device/Wrap Spring Clutch Assembly away from the patient. The Wrap Spring
Clutch will automatically lock in place at any angle unless the Clutch Release is pressed (Fig. 10).
Fig. 10
1. Clutch
release
lock
2. Clutch
release
å
Make sure the CPM is in a fully upright (Fig. 4, page 9) position and that the Clutch Release Lock is in the locked
position. If the Clutch Release Lock does not fully engage it may be necessary to push/pull the Clutch Release slightly.
Attach safety strap.
4.3.3 Lowering LiteLift PRO for adjustments and Patient Use
Danger!
Always fully support CPM and Wrap Spring Clutch when lowering device to bed.
Danger!
Always reengage Clutch Release Lock after lowering device to bed.
Fully support the CPM Device with at least one hand (Fig. 11) before disengaging the Clutch Release Lock. (Fig. 10,
Pos. 2)
Fig. 8
Fig. 11
ç
Fig. 9
11
Advertisement
Table of Contents
