Table of Contents
Advertisement
6.0 Operating the LITELIFT® PRO-for Medical Personnel
Attention!
The controller must be positioned so that patients and medical personnel can reach the START/STOP button
during use.
6.1 Setting up the LiteLift PRO Controller
Fig. 31
SD Memory Card
being inserted into
Pro Controller.
6.2 Operating the LiteLift PRO
6.1 PRO Controller Overview
The PRO Controller is connected to the LiteLift PRO CPM Device via a pendant cable, which plugs into the bottom of the
CPM Base Unit (Fig. 31).
Fig. 32
SD Memory Card
being inserted into
Pro Controller.
Each PRO Series CPM Base Unit controls one or more motors and ancillary equipment according to commands received
from the PRO Controller pendant. The firmware in the PRO Controller and base unit can be upgraded (Fig. 32). The SD
Memory Card can also store and download patient therapy profiles and doctor's prescriptions.
PRO Controller Overview Modes and Screens
The PRO Controller has two main modes: Operating Mode, with 1 or more Joint Operator screens available, and Settings
Mode, which contains multiple settings screens. All screens are controlled with the buttons and keys located on the lower
half of the PRO Controller pendant.
18
Advertisement
Table of Contents
