Table of Contents
Advertisement
Fig. 33
Knee Joint Setup
Operating Mode Screen
with all settings made
available to patient.
The Operating Mode Screen (Fig. 33) is normally the first screen displayed. The Operating Mode Screen displays
current settings and also allows limited access to patient operational controls, including Force, Pause Time, Speed, and
Range of Motion settings. In order to avoid unintended changes to the settings we have created a special Key Sequence
that allows a Clinical Professional to exit the Operating Mode and enter the Setting Mode. The Key Sequence* must be
input via the Direction and Select Keys and can be obtained from your account representative.
* NOTE: To protect the patient, settings may be locked to allow only medical/clinical professionals to make changes to the CPM device settings. Locking the settings will require a Special Key Sequence. Please
contact your Authorized Service Representative, Dealer, or Distributor for this or answers to any other questions you may have.
Setting Mode Information, settings and operation concerning the CPM Device are presented on a series of setting and
operating screens in the PRO Controller. The Setting Screens include Joint Set-up Screens, the Patient Profile Screen,
and the System Settings Screen, and are intended to permit only qualified professionals to make changes to the CPM
device setting parameters.
Once the functional parameters are set, the PRO Controller can be put into Operating Mode.
Flexion
Force
Pause
Speed
Force
Pause
Speed
Extension
19
Advertisement
Table of Contents
