Table of Contents
Advertisement
Fig. 42
Start-up Screen
The PRO Controller will automatically recognize which PRO Series CPM Device it is connected to, and will flash a Start
up Screen (Fig. 42). for about 10 seconds to indicate that it has been properly connected. It will then progress to standby
mode and start up in the Operating Mode.
* NOTE: To protect the patient, settings may be locked to allow only medical/clinical professionals to make changes to the CPM device settings. Locking the settings will require a Special Key Sequence. Please
contact your Authorized Service Representative, Dealer, or Distributor for this or answers to any other questions you may have.
6.2.3 CPM Device Parameters: Overview
Fig. 43
Joint Set-Up Screen
B. Patient ROM lock out settings
C. Flexion setting limit window
D. Patient flexion setting window
F. Patient extension setting window
G. Extension setting limit window
B. Patient ROM lock out settings
The PRO Controller has several screens available in the Setting Mode, including the Joint Set-up Screens (one or more,
depending on the CPM device being controlled), the Patient Profile Screen, and the System Set-up Screen. Each screen
has the title of the screen listed in the upper left corner (Fig. 43, Pos. A). Each screen also has its own icon at the
botton of the Screen. Icon for Joint Set-up Screen, (Fig. 43, Pos. H). Icon for Patient Profile Screen (Fig. 43, Pos. Q).
Icon for System Settings Screen (Fig. 43, Pos. P).
All CPM Devices will automatically default to the Operating Mode (Fig. 33, page 19) when powered up.
After entering the Key Sequence*, the Joint Set-up Screen will appear (Fig. 43).
* NOTE: To protect the patient, settings may be locked to allow only medical/clinical professionals to make changes to the CPM device settings. Locking the settings will require a Special Key Sequence. Please
contact your Authorized Service Representative, Dealer, or Distributor for this or answers to any other questions you may have.
24
A. Screen name
E. ROM setting column
H. Icons for joint set up screens
A. Start up Screen
B. Pro Controller
C. Soft Keys
D. Direction Keys
E. Select Key
F. Start/Stop Button
Knee Joint Setup
Flexion
Force
Pause
Speed
Force
Pause
Speed
Extension
Q. Icon for patient profile screen
I. Session number
J. Time
K. Force, pause time
and speed setting
L. Slider bar
M. Angle display
R. Patient lock-out
setting
O. Soft key
P. Icon for system settings screen
Advertisement
Table of Contents
