Connecting Your Components - Otto Bock 7000P Instructions For Use Manual

4.2 Connecting your Components

Fig. 2
Connecting the
Pendant Cable to
the pendant.
1. Connect the appropriate end of the PRO Controller cable to the PRO Controller (Fig. 2), and the other end to the
CPM Device (Fig. 3, Pos. 1), and tighten the lock nut.
Fig. 3
Connecting the
Pendant Cable to a
CPM device.
2. Connect the Power Adaptor connector on the end of the Motion Unit and tighten the plug's lock nut (Fig. 3,
Pos. 2).
3. Connect the Power cord to the Power Adaptor. Plug the other end of the Power cord into a standard (grounded)
wall outlet.
8
å
ç