Table of Contents
Advertisement
Danger!
Patients are responsible for using the device according to these Instructions for Use.
Patient Instructions
The LiteLift PRO Knee CPM Device is designed to offer continuous passive motion for your knee after surgery. The
LiteLift PRO is operated via a Pendant controller, which allows you to start, pause and stop the activity of the device. The
Pendant also allows you to make changes to certain functional settings, depending on your Physician's prescription.
Turning on the LiteLift PRO CPM Device
Turn on the LiteLift PRO at the base of the device. A Start-up Screen will appear in the Pendant which will be replaced
after a moment with the Operating Screen.
Fig. 52
Operating Screen with functional elements called out.
A. Screen Title
B. Flexion ROM
Setting Box
C. Display Screen
D. Extension ROM
Setting Box
E. Soft Keys
use to tab left or right through screens
or directly access flexion and extension
F. Direction Keys
G. Select Key
H. Start/Stop Button
The Operating Screen (Fig. 52) gives you information about the status of the LiteLift Pro, and may display setting options
depending on your prescription. Keys located in the lower half of the Pendant are used to start, stop, and choose various
function in the Pendant.
30
settings
Knee Joint Setup
Flexion
Force
Pause
Speed
Force
Pause
Speed
Extension
I. Session Number
J. Time
K. Flexion Force Setting
L. Flexion Pause Setting
M. Flexion Speed Setting
N. Angle
O. Extension Force Setting
P. Extension Pause Setting
Q. Extension Speed Setting
Advertisement
Table of Contents
