Viewing Gvrp Statistics - Cisco 300 Series Administration Manual
Managed switch
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Quick start manual (72 pages) ,
- Datasheet (14 pages)
Table of Contents
Advertisement
2
Viewing GVRP Statistics
STEP 1
STEP 2
16
•
Click View All Interfaces Statistics to see all ports on a single page.
The GVRP page displays information regarding GARP VLAN Registration Protocol
(GVRP) frames that were sent or received from a port. GVRP is a standards-based
Layer 2 network protocol, for automatic configuration of VLAN information on
switches. It was defined in the 802. 1 ak amendment to 802. 1 Q-2005.
GVRP statistics for a port are only displayed if GVRP is enabled globally and on
the port. See the GVRP page.
To view GVRP statistics and/or set the refresh rate:
Click Status and Statistics > GVRP.
Enter the parameters.
•
Interface—Select the specific interface for which GVRP statistics are to be
displayed.
•
Refresh Rate—Select the time period that passes before the GVRP
statistics page is refreshed.
The Attribute Counter block displays the counters for various types of packets per
interface.
•
Join Empty—Number of GVRP Join Empty packets received/transmitted.
•
Empty—Number of GVRP empty packets received/transmitted.
•
Leave Empty—Number of GVRP Leave Empty packets received/
transmitted.
•
Join In—Number of GVRP Join In packets received/transmitted.
•
Leave In—Number of GVRP Leave In packets received/transmitted.
•
Leave All—Number of GVRP Leave All packets received/transmitted.
The GVRP Error Statistics section displays the GVRP error counters.
•
Invalid Protocol ID—Invalid protocol ID errors.
•
Invalid Attribute Type—Invalid attribute ID errors.
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
Status and Statistics
Viewing GVRP Statistics
Advertisement
Table of Contents
