Default Settings For Terminal Display And Session Parameters - Cisco MDS 9000 Series Configuration Manual

Configuring Terminal Settings and Sessions
Command
show line
show users
show running-config [all]
For detailed information about the fields in the output from these commands, see the Cisco Nexus command
reference guide for your device.

Default Settings for Terminal Display and Session Parameters

This table lists the default settings for terminal displays and session parameters.
Table 14: Default Terminal Display and Session Parameter Settings
Parameters
Terminal type
Terminal length
Terminal width
Terminal inactive session timeout
Console session data bits
Console inactive session timeout
Console session parity
Console session speed
Console session stop bits
COM1 session data bits
COM1 hardware flow control
COM1 session parity
COM1 session speed
OL-29291-02
Default Settings for Terminal Display and Session Parameters
Purpose
Displays the COM1 and console ports settings.
Displays virtual terminal sessions.
Displays the user account configuration in the running
configuration. The all keyword displays the default
values for the user accounts.
Default
ansi
0 lines for console sessions
31 lines for virtual terminal sessions
80 columns
Disabled (0 minutes)
8
Disabled (0 minutes)
none
11520 bps
1
8
Enabled
none
9600 bps
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
83