Appendix B
Connector and Cable Specifications
Figure B-4
Dual-Purpose Ports
The Ethernet port on a dual-purpose port uses standard RJ-45 connectors.
Figure B-5
The SFP module slot on a dual-purpose port uses SFP modules for fiber-optic and copper uplink ports.
See the Catalyst 3560 release notes for a list of supported SFP modules.
The auto-MDIX feature is enabled by default. For configuration information for this feature, see the
Note
switch software configuration guide or the switch command reference.
Console Port
The console port uses an 8-pin RJ-45 connector, described in
RJ-45-to-DB-9 adapter cable connects the console port of the switch to a console PC. You need an
RJ-45-to-DB-25 female DTE adapter (ACS-DSBUASYN=) to connect the switch console port to a
terminal. For console port and adapter pinout information, see
OL-6337-07
Copper SFP Module RJ-45 Connector
Pin
Label
1
TP0+
2
TP0-
3
TP1+
4
TP2+
5
TP2-
6
TP1-
7
TP3+
8
TP3-
10/100/1000 Port Pinouts
Pin
Label
1
TP0+
2
TP0-
3
TP1+
4
TP2+
5
TP2-
6
TP1-
7
TP3+
8
TP3-
1
2 3
4 5 6 7 8
Figure B-5
1
2 3
4 5 6 7 8
Table B-2
and
Table
Table B-2
and
Catalyst 3560 Switch Hardware Installation Guide
Connector Specifications
shows the pinouts.
B-3. The
Table
B-3.
B-3