To Select Level Or Edge Sensitivity For /Irq7 - HP 68302 User Manual

Chapter 3: Configuring the Emulator
Setting the Hardware Options

To select level or edge sensitivity for /IRQ7

1 Choose the Settings→Emulator Config→Hardware... (ALT, S, E, H)
command.
Select either the level or edge option for the /IRQ7 mode.
2
Choose the OK button to exit the Emulator Config dialog box.
3
You can only select level or edge sensitivity for /IRQ7 when the dedicated
interrupt mode is selected.
When the /IRQ7 mode is level, the interrupt 7 will happen on a low level on
/IRQ7.
When the mode is edge, a falling edge on /IRQ7 causes an interrupt.
78