HP 68302 User Manual page 242

Step Dialog Box
Choosing the Execution→Step... (ALT, E, S) command opens the following
dialog box:
Current PC Specifies that stepping start from the current program
counter address.
Start Address Specifies that stepping start from the start address or
transfer address.
Address Lets you enter the address from which to single-step.
Count Indicates the step count. The count decrements by one for
every step and stops at 1.
Over If the source line to be executed contains a function call or
the assembly language instruction to be executed contains
a subroutine call, this option specifies that the entire
function or subroutine be executed.
Follow PC If you check the Follow PC box, stepping will provide more
detail because it will follow the PC for each step, and
update the Source window after each step. Leaving this
box unchecked speeds the stepping process; the steps will
be counted, but the content of the Source window will not
be updated until stepping is completed.
Chapter 8: Menu Bar Commands
Execution→Step... (ALT, E, S)
243