HP 68302 User Manual page 45

3
To run the program, choose the Execution→Run (ALT, E, U)
command. Or, press the F5 key.
Notice that register contents are replaced with "----" in the display. This
shows the debugger cannot update the register display. In order for the
emulator to update its register display, the emulation monitor must interrupt
target program execution while it reads the registers.
4 Choose the RealTime→Monitor Intrusion→Allowed (ALT, R, T, A)
command to deselect the real-time mode. Notice that the contents of
the registers are updated periodically.
Chapter 1: Getting Started
Step 18. Display register contents
45