Chapter 5: Debugging Programs
Tracing Program Execution
Example
Bus Cycles Displayed in Trace with "Mixed Mode" selected:
To display absolute or relative counts
•
From the Trace window's control menu, choose the
Display→Count→Absolute (ALT, -, D, C, A) or
Display→Count→Relative (ALT, -, D, C, R) command.
Choosing the Display→Count→Relative (ALT, -, D, C, R) command selects
the relative mode where the state-to-state time intervals are displayed.
Choosing the Display→Count→Absolute (ALT, -, D, C, A) command selects
the absolute mode where the trace time is displayed as the total time elapsed
since the analyzer has been triggered.
181