The PROGFLASH command downloads code from files on the host computer
into Flash EPROM memory in the HP 64700. During this download, you will
see messages similar to the following:
Rebooting HP64700...with init -r
Downloading flash programming code:
'/hp64700/lib/npf.X'
Checking Hardware id code...
Erasing Flash ROM
Downloading ROM code: '/hp64700/update/647??.X'
Code start 280000H
Code size 29ABAH
Finishing up...
Rebooting HP64700...
Flash programming SUCCEEDED
You can display firmware version information and verify the update by
choosing the Help→About Debugger/Emulator... (ALT, H, D) command in
the Real-Time C Debugger.
Chapter 15: Installing/Updating HP 64700 Firmware
Step 3. Run PROGFLASH to update HP 64700 firmware
495