Table of Contents
Advertisement
Chapter 8: Menu Bar Commands
Settings→Emulator Config→Memory Map... (ALT, S, E, M)
Current Map
Available
Delete
Delete All
Close
Command File Command
MAP addressrange mem_type func_code
Maps the specified address range with the specified memory type and
function code.
MAP OTH(ER) mem_type
Specifies the type of the specified non-mapped memory area.
Any of the above command file commands must be preceded and followed by
the respective start and end commands:
MAP STA(RT)
Starts the memory mapping command section.
MAP END
Ends the memory mapping command section.
See Also
"Mapping Memory" in the "Configuring the Emulator" chapter.
306
Lists currently mapped ranges.
Indicates the amount of emulation memory available.
Deletes the address range selected in the Current Map list
box.
Deletes all of the address ranges in the Current Map list
box.
Closes the dialog box.
Advertisement
Chapters
Table of Contents
