Trace→Trigger Store - HP 68302 User Manual

Trace→Trigger Store... (ALT, T, T)
Traces program execution as specified in the Trigger Store Trace dialog box.
You can enter address, data, and status values that qualify the state(s) that,
when captured by the analyzer, will be stored in the trace buffer or will
trigger the analyzer.
Data values are 16-bit values (because the data bus is 16 bits wide). To
identify byte values on the data bus, use "don't cares" as shown below:
Status values identify the types of microprocessor bus cycles. You may
select status values from a predefined list.
Note
The analyzer traces unexecuted instructions due to prefetching by the 68302
processor.
Trigger Store Trace Dialog Box
Choosing the Trace→Trigger Store... (ALT, T, T) command opens the
following dialog box:
Data at an even address: 12xx
Data at an odd address: 0xx34
Chapter 8: Menu Bar Commands
Trace→Trigger Store... (ALT, T, T)
269