Chapter 2: Using the Debugger Interface
Working with Debugger Windows
To change the debugger window fonts
1
Choose the Settings→Font (ALT, S, F) command.
Select the font, font style, and size. Notice that the Sample box
2
previews the selected font.
Choose the OK button.
3
To set tab stops in the Source window
1
Choose the Settings→Tabstops (ALT, S, T) command.
Enter the tab width. This width is also used for source lines in the
2
trace window.
Choose the OK button.
3
The tab width must be between 1 and 20.
62